Seven, 1-2 hours before and after the feed feed, the impeller oxygen generator agitates the cultured pond water body, so that the water body forms a circulating flow. Five, long weather, the water temperature is high, due to a large amount of feeding, the aquatic product is drained, causing water quality, poor transparency, many organic matter in the water, the upper and lower solubols are large, the lower "oxygen bond" is large.

The oxygen generator has the effect of watering, and the vertical circulation of the breeding pond can be formed when booting.To turn on the oxygen generator for 2-3 hours, because in the sunny day of high temperature, the photosynthesis of the floating plants is particularly strong, and a large amount of oxygen is released into the water body. The oxygen generator is used in a high temperature in summer.

After reasonable use of the oxygen generator, there is the following role in production: make full use of water; prevent the floatinghead; save the floating head to prevent the flungee; accelerate the pond material circulation; stabilize water quality; jet aerator Manufacturers increase the amount of fish seed stocking density and increase the amount of payment of the fish species, Thereby increasing yield; conducive to preventing fish diseases.

On the one hand, the feed flavor can be taken to the farming pond, and the effect is achieved. Sixth, summer farming ponds often cause hypoxia floats due to hypoxia due to pesticides and other biological energy consumption. However, in the water quality breast aquaculture, the water transparency is 20-30 cm deep, and the medium of the water body is weak due to no illumination, and the photosynthesis is weak.

Therefore, in the night 1-2, the oxygen generator is opened. To the supplement, the lower solubility is quickly consumed, and the result is accelerated with the speed of the entire breeding pond. . If you don't raise new water for a long time, it will cause water quality and causing an oxygen-deficient float of aquatic product. On the main basis of precise model, it is not allowed to open an oxygen generator. 

Briefly, the use of the oxygen generator is: open at noon at sunny day, open in the cloudy day, continue to open in the rain at night, not in the night, not in the day during the day, start early; atmospheric heat, start time, weather, weather Cool, short start, long start time, short start time, large load area, long start time, small load area, short start time, ensure timely oxygenation.

At this time, the mechanical oxygen function of the oxygen generator must be fully utilized, and the oxygen generator is initiated as soon as possible, directly increase the pool water dissolved oxygen, reach the purpose of preventing and rescuing the fish head. Avoid starting the machine at noon at the rainy day. .

In view of this, the measures taken when designing an oxygen plane are as follows: However, on a sunny day, with phytoplankton photosynthesis start combination can greatly improve the oxygen storage level of the body of water. This involves the solubility and dissolution rate of oxygen. For farmers, they will start over the difficulties again. Although the oxygen generator can increase oxygen, the more it is, Wholesale Deep Water Jet Aerators Manufacturers the better it.

As a apex, the answer is negative. So how to use it? Bring the oxygen generator below to take everyone! The effect of the oxygen plane is not only an increase in oxygen, but also stirring water and explosive gas pond culture, especially large breeding, is an indispensable oxygen generator. At the same time, there are two situations where there are two cases when starting the pond oxygen generator.

First of all, in the hot sunny weather, try not to get up at night; second, in the summer rainy weather, do not start the machine at noon because the air pressure is low. For summer weather, the start-up time of the oxygen generator should be selected as follows: at high temperature weather, from 12 noon to 2 pm. "Four open three do not open". 

What are the functions of the impeller aerator? Impeller aerator can save fish and ensure high output According to measurements, per kilowatt of impeller type aerators, impeller type aerators can add more than 1.8 kg of oxygen to the water per hour, impeller type aerators are enough for several tons of fish to breathe for an hour, impeller type aerators can solve the pond Hypoxia in fish.

After using the impeller aerator, the fish pond will transform from a natural ecosystem to an artificially controlled ecosystem. Using the impeller aerator according to the number of fish in the pond or different weather conditions can create important conditions for high and stable production. The impeller aerator promotes the convection and exchange of the water body. The impeller aerator has the effect of lifting water upwards. After the impeller type aerator is turned on,Wholesale Long Arm Aerators Factory the pool water will circulate vertically.

The impeller type aerator transports the nutrients adsorbed on the bottom to the surface layer, and the impeller type aerator transports the oxygen-enriched water from the surface layer to the bottom layer. The machine can even water quality. Toxic gas escape, concentrated oxygen release, the impeller type aerator can make the dissolved gas in the pool water escape into the air during the process of stirring the water. Using the impeller aerator in the early morning can accelerate the escape of toxic gases in the water.

Turning on the impeller aerator at noon will also release the high concentration of dissolved oxygen in the upper oxygen-enriched water. However, due to the strong stirring effect of the impeller aerator, the liquid level is fresher, and most of the dissolved oxygen is reduced by stirring the water. Spread to the lower level.

The impeller aerator reduces the feed coefficient. This is an indirect function of the impeller aerator. The feed coefficient is low when the water temperature is suitable and the dissolved oxygen concentration is high. The feed coefficient of the impeller type aerator with low dissolved oxygen and high dissolved oxygen is 1 or even several times higher than that of high dissolved oxygen. Main business: impeller type aerator production, impeller type aerator sales, impeller type aerator manufacturers, impeller type aerator quotation

Frequently check whether the supporting rod connecting screws, impeller locking bolts, and impeller wide plate bolts are loose. If the bolts are found to be loose, they should be tightened in time. 2. Safety precautions for the operation of the impeller type aerator 1. The impeller type aerator using 380v three-phase AC must use a dedicated circuit for the power supply, and must be powered by an electrician in accordance with the power supply safety operation procedures.

The motor must be equipped with leakage, single-phase, low-voltage protection devices to ensure the normal operation of the circuit. The power cord should use three-phase four-wire concentric rubber cable, the recommended wire diameter is 4x2.5 mm, the wiring is firm, and the grounding is stable.

The input power supply voltage is 380v, and the voltage fluctuation does not exceed 5% of the rated voltage taxi, so as to prepare for long-term use of low voltage and damaged motors. Before using the impeller aerator, please charge the 10*~30* Wholesale Prawn Pond Aerator Manufacturers oil in the speed box (the fuel grade is carried out according to the product manual), and let the inspector charge it so that it can work without the sad person’s oil.

To avoid damage to parts and motors. It is strictly forbidden to fix the impeller type aerator with metal wires such as iron wire. When maintaining, maintaining, handling or disassembling the impeller aerator, the power must be cut off to ensure personal safety.

When turning on the power of the impeller aerator, no one can go to the fishing ground to prevent electric shock and machine accidents. The main business of the company: Zhonghui provides our customers with high-quality, safe, energy-saving and environmentally friendly fishery machinery products. Mainly engaged in impeller type aerator, waterwheel type aerator, aerator accessories, etc.

How does the waterwheel type aerator operate? The application scope of the waterwheel type aerator mainly includes: directional source water flow, dirt in the energy sedimentation tank, guiding eels to eat and cleaning the food field, the special function of raising eels in the pond, and convenient water exchange in the mechanized fish pond. The impeller aerator can flush the bottom of the pool dirt.

The waterwheel type aerator can be applied to mechanized fish ponds, factory fish farming and eel pond farming. The waterwheel type aerator is driven by a motor, and the waterwheel type aerator drives the impeller to rotate through a reducer, and then decelerates. When working,aerator for shrimp the blades of the waterwheel type aerator are partially or completely immersed in water.

The waterwheel type aerator adopts a unique design concept, and the key components are processed by special equipment. The operation noise on the water and surface is extremely low, which is extremely beneficial to the growth of fish, especially shrimp and fry. During the rotation of the waterwheel type aerator, when the blades just enter the water, the blades hit the water surface, causing splashes and forcing air into the water. At the same time, the waterwheel type aerator produces a strong force, pushing the water surface pressure to the bottom of the pool on the one hand, and pushing the water back to the bottom of the pool on the other hand.

The waterwheel aerator is intelligent, safe and easy to move. In the case of sudden pollution of urban rivers, artificial lakes and waterscapes, it can be used as an emergency aerator. When the paddle of the waterwheel aerator is perpendicular to the water surface, a force parallel to the water surface of the waterwheel aerator is generated to form a directional water flow. 

The key structure of the impeller aerator is made of electric motors , Gearbox, impeller, strut, float and other parts. How is the performance of the impeller aerator? How is the performance of the impeller aerator? In addition to aeration, the impeller aerator also has the function of stirring water and aeration to promote the growth and reproduction of phytoplankton and enhance the primary productivity of the pond.

Quality assurance welcomes new and old customers to inquire! The frequency conversion aerator is a machine that is often used in the fishery industry . The purpose, and it is worth mentioning that the variable frequency aerator can also inhibit the growth of anaerobic bacteria in the water, and the variable frequency aerator prevents the deterioration of the pond water from threatening the living environment of fish. Low noise: There is no gear box rotation, so it can effectively reduce noise.

It can not only solve the problem of fish floating heads caused by lack of oxygen in pond aquaculture, but also eliminate harmful gases, promote water convection exchange, improve water quality conditions, and reduce feed coefficients. The main function of the variable frequency aerator is to prevent the fish in the pond from being hypoxic and to increase the oxygen.

The frequency conversion aerator drives the working parts through a power source such as a motor or a diesel engine, so that the 'oxygen' in the air is quickly transferred to the equipment in the aquaculture water.What are the advantages Solar Plastic Feeder of frequency conversion aerators? Environmental protection: The frequency conversion aerator has no gear box, no need to refuel, and no pollution to the environment.produces impeller type aerators, frequency conversion aerators, fish pond aeration controllers and other products.